SKU: 44632052697
the box bass boosted

the box bass boosted BAS8

$19.07 $21.19
Save 10%
No.2 Bestseller on virtipatel.com >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 11 - Jul 16

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

the box bass boosted BAS8Our Massive Audio BAS8 is the perfect Bass solution for those with limited space and an unlimited thirst for sound quality. The BAS8 is an 8" Powered Cast Basket Subwoofer pre installed within an Industrial Grade Carpeted ported enclosure. The BAS6 pre loaded Subwoofer is conservatively rated to handle 400 Watts RMS, yet efficient enough to yield high Sound Pressure Levels. It utilizes a 2" Inch, 4 Layer, Voice Coil and incorporates tight Red

Our Massive Audio BAS8 is the perfect Bass solution for those with limited space and an unlimited thirst for sound quality. The BAS8 is an 8" Powered Cast Basket Subwoofer pre-installed within an Industrial Grade Carpeted ported enclosure. The BAS6 pre-loaded Subwoofer is conservatively rated to handle 400 Watts RMS, yet efficient enough to yield high Sound Pressure Levels. It utilizes a 2" Inch, 4 Layer, Voice Coil and incorporates tight Red stitching that is sewn through a Kevlar fiber enhanced non-pressed paper cone with an EROM Foam Surround.  The entire cone assembly is bonded to a heavy gauge steel basket that bolts to High Grade Double Stacked 90oz Strontium Ferrite Magnets.

The critical function of keeping the voice coil centered in the magnetic gap is performed by the triple black poly cotton spiders with mirror image layout and woven round tinsel leads. The enclosure is equipped with Quick Disconnect 4 AWG Power, REM and Ground terminals allowing you to remove the box quickly when extra cargo space is needed. Their enclosure utilizes heavy duty black anodized deep steel grills to protect the cone and allow for maximum X-Max as well as a Clipping LED to protect the entire system.

The BAS8 is powered by a high performance built-in Amplifier with (ATO) Auto Turn-On, Audio Sensing and Remote Trigger. The Built-In Hi-Low converter allows you to connect directly from your system without the need of an additional module and its associated cost. Another unique feature is the inclusion of a Remote Bass control with adjustments up to 12db @ 45Hz. Additionally, there are adjustment controls for Low Pass with built-In 12dB Octave Butterworth Crossover, Bass Boost & Phase to 180°. To sum things up this is a high quality, turnkey Bass solution for full time or lease cars you can be proud to show off!

Manuals & Downloads

BAS8 Manual

FEATURES
  • Die Cast Basket with Black Textured Finish
  • Kevlar Fiber Enhanced Non-Pressed Paper Cone with Textured Paint Finish
  • EROM Foam Surround with Red Stitching
  • 2" 4-Layer Hi-Temp Voice Coil 
  • Fiberglass Woven Dust Cap
  • Double Stacked 90oz High Energy Magnets 
  • Enhanced Cooling T-yoke Design with Black Anodized Finish
  • Customized Rubber Gasket and Magnet Boot
  • Triple Black Poly Cotton Spiders with Mirror Image Layout
  • Customized Rubber Gasket & Magnet Boot
  • Black Anodized Deep Steel Woofer Bars
  • Quick Disconnect 4 AWG PWR / GND / REM Terminals
  • Low Pass Control with Built-In 12dB Octave Butterworth Crossover 
  • Phase Control ~ 0° - 180°
  • Clip LED Indicator
  • Bass Boost from 0dB ~ +12dB @45Hz
  • Remote Gain Control 
  • High Quality Industrial Grade Carpet Ported Enclosure

SPECIFICATIONS
Size 8"
Watts RMS 400w
Peak Power 800w
Cone Kevlar Fiber Enhanced Non-Pressed Paper Cone
Voice Coil 2" 
Surround EROM Foam
Magnet 90oz
Terminals Quick Disconnect
Basket Heavy Gauge Cast Aluminum
Tinsel Leads Heavy Duty Triple
X-Max 11mm (1-way) 
SPL 86 dB @2.83V/1m
FS 60Hz
Crossover Control  Variable 50Hz ~ 200Hz / 12dB Octave Butterworth
Bass Boost 0 ~ -12dB @45Hz
Frequency Response  25Hz ~ 200Hz
Input Sensitivity  200mV ~ 10V
Fuse Rating 25A x 2 
Dimensions 17.1" x 11" x 10.6"
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 44632052697

Discover Niche Categories That Outsell the box bass boosted

Top-Converting Item to Boost Your Average Order

4.3 ★★★★★
Based on 119 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
A
Verified Purchase
Amazon Customer
Phoenix, US
★★★★★ 5
Quality
Quality item. Using a butcher block on top to make a desk.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 13, 2026
A
Verified Purchase
abur
Phoenix, US
★★★★★ 5
I love it!!!
Size: M Desk Unfinished 3/4-in and 1/2-in
Easy to assemble, all the pieces were in the box. I set everything out to be sure. Instructions were easy and clear, took about 10 min to put together. Seems to be quality pipe, strong stable build even at just hand tight. When I put the desk top on it was already level so bonus there. This kit is a great value, before I found the M desk I was looking on Pinterest for pipe leg designs thinking a trip to the hardware store and I could make it for cheaper, which was not the case. I 100% will recommend, and will purchase again.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 5, 2020
N
Verified Purchase
Nancy
Boise, US
★★★★★ 5
Real steel pipe
Size: O Desk Unfinished 3/4-in and 1/2-in
This pipe table leg set was great. It's real steel pipe like from the hardware store. It does have a layer of oil on it so that must be stripped using dawn or some other degreaser before handleing and painting. It is also offset in the middle bar so if you use it as a desk you get more leg clearance. I used it as a table base so I bought matching middle braces to set the middle support in the center of the table. Once together it looks great. I highly recommend getting this if you want a good quality pipe base.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 11, 2023
K
Verified Purchase
Kim R-A
Carnegie, US
★★★★★ 5
Price / Quality - Office Desk - Perfect
Size: H Desk Unfinished 3/4-in and 1/2-in
Purchased two sets to create a custom L shaped desk for the office. Placed a pine stained top. Perfect to handle a monitor, multiple laptops, normal office equipment. Extra benefit is the cross piece at the bottom as a foot rest. Very sturdy while sitting on carpet. Compared to normal pipe material purchased in large box store -- could not have asked for a better product for the price. Looking at other products for additional projects for around the house for the product and vendor. - Highly Recommend.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 27, 2021
J
Verified Purchase
Joseph E. Brackman
Lexington, US
★★★★★ 4
Fantastic style, good stability, customizable finish, and great customer service
Size: M Desk Unfinished 3/4-in and 1/2-in
Put this together in about April 2020 right about the crazy lockdown/quarantine/work-from-home timeframe. I knew that I wanted a simple hardwood desk with no drawers or stuff below the top. I have an ergonomic keyboard tray that I have attached to all my work desks for many years now, and it was too long for my old home desk, which was also made of MDF and was falling apart. Boo. Enter this kit plus a butcher block top from the big box store. This kit went together easily. I had lost the instructions but a quick email to the JS Supplies company, and they hooked me up. By the time they sent it, I had actually figured out the part that was puzzling, which was what the all-thread pieces were for (the couplers between the elbows and the flanges on the top side). I degreased all the parts with a simple Simple Green-type solution diluted in a 5 gallon bucket. I then sprayed the pieces with a satin nitrocellulose laqcuer (Minwax brand that I got from the home improvement big box). Worked great. I thought about doing a sealed rust finish using a science project volcano--vinegar and baking soda for a quick layer of rust on the outside--but I decided against it, as I wasn't sure of how stable the final product would be, even after a clear spray finish. The satin nitro finish looks great without even looking like a finish. I also coated the pieces with paste wax after the finish dried, just for good measure. The one thing that is a bit disappointing is the stability... WITH MY TOP, mind you.I should be clear that the top that I'm using is a 1-3/4" thick monster piece of birch butcher block that is 60" x 30". I'm guessing that it's 40-50 pounds? Maybe more. This is probably WAY more weight than this leg set is made for. I also have the aforementioned keyboard tray that sticks out (torque equals force times lever arm) and causes even more torque. I get some shaking with the top with this setup. I have the desk on carpet; I was concerned that maybe the carpet and pad were not giving enough stability with the feet, so I made some plywood platforms for the feet. I also carefully leveled the feet to make sure it wasn't just uneven legs that was causing the instability. Still shakes no matter what I tried. I think it's just that I have such a heavy top--more than this thing is spec'd for. That's totally fine, and I don't want to knock off a bunch of stars for that. I leave these comments more as a "don't do what I did" thing. Just be advised that you need to limit the weight of the top to something reasonable. The design of one upright on each side of the desk with a pipe coupler in between is probably the weak spot with my heavy desktop; I'm thinking of either adding tension on either side (with some threaded rod and turnbuckles) or some extra supports with something like the Steel-Tek pieces from Lowe's. Overall, I'm very satisfied with the product and the company!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 23, 2020

recommand products

Yu Gi Oh! The Crimson King Structure Deck Display Box- Featuring Jack – Shikdar Trading
28.29
Yugioh Jinzo Deck
29.13
KCORP Dicewinder Deck Box – Mana Moon
27.83
Yu-Gi-Oh! Yugi Starter Deck (2002) Complete Set| TradingCardSets.Com
29.52
Yu-Gi-Oh! OCG "Blazing Vortex" [1103] (Japanese)
21.64